GENERAL
TERMS.
These terms apply to all quotations, agreements and deliveries of LEDSYS B.V.: the design, supply, installation and maintenance of LED displays for indoor and outdoor use.
Article 1 Definitions
1.1 LEDSYS: LEDSYS B.V., located at Aquamarijnstraat 105, 7554 NN Hengelo, the Netherlands, registered with the Chamber of Commerce under number [Chamber of Commerce number to be provided].
1.2 Client: the party with whom LEDSYS enters into an agreement or negotiates about one. These terms are written for business clients.
1.3 Agreement: any arrangement between LEDSYS and the Client for the supply of goods, services or both.
1.4 Goods: LED panels and displays, control and driver equipment, structural and mounting materials, spare parts and accessories.
1.5 Services: advice, design, engineering, installation, configuration, maintenance, repair and support.
1.6 Specification: the written description of the display to be supplied, stating at least the pixel pitch, dimensions, brightness, finish and mounting method.
Article 2 Applicability
2.1 These terms apply to all quotations, offers, agreements and deliveries of LEDSYS, unless the parties agree otherwise in writing.
2.2 Purchasing or other terms and conditions of the Client are expressly rejected.
2.3 Deviations from these terms only apply if LEDSYS has confirmed them in writing, and only for the agreement for which they were made.
2.4 If a provision is null and void or voidable, the other provisions remain in force. The parties will then replace the provision with a valid one that comes as close as possible to its original intent.
Article 3 Quotations and offers
3.1 Quotations are without obligation and valid for thirty days, unless they state a different period.
3.2 A quotation is based on the information provided by the Client about the location, viewing distance, lighting conditions, structure and available facilities. If that information turns out to be incorrect or incomplete, LEDSYS may adjust the quotation.
3.3 Images, dimensions, pixel pitch, brightness and lifetime values in brochures and examples are indicative as long as they have not been laid down in the specification.
3.4 LEDSYS is not bound by obvious mistakes or clerical errors in a quotation.
3.5 A composite quotation does not oblige LEDSYS to supply part of it for a corresponding part of the price.
Article 4 Formation of the agreement
4.1 The agreement is formed as soon as the Client accepts the quotation in writing, or as soon as LEDSYS starts the work with the Client’s consent.
4.2 The specification determines what LEDSYS supplies. Anything not included in it falls outside the agreement.
4.3 LEDSYS may have the work carried out in whole or in part by third parties. LEDSYS remains responsible for the result.
Article 5 Prices
5.1 All prices are in euros and exclusive of VAT.
5.2 Unless stated in the quotation, the following are not included: transport to the location, lifting and access equipment, scaffolding, traffic measures, structural alterations, the electrical and network connection up to the display, and permits.
5.3 If the costs of materials, exchange rates, import duties, energy or transport change after the agreement has been concluded, LEDSYS may pass on that change for deliveries that take place more than three months after the agreement was concluded.
5.4 Work carried out outside normal working hours at the Client’s request is charged at the surcharges applicable at that time.
Article 6 Payment
6.1 Unless agreed otherwise, the Client pays [payment schedule to be provided, for example 40% on order, 50% on delivery and 10% after handover].
6.2 The payment term is thirty days from the invoice date.
6.3 If the payment term is exceeded, the Client owes the statutory commercial interest without notice of default, plus the extrajudicial collection costs in accordance with the applicable statutory scale.
6.4 The Client may not suspend payment or set it off against a counterclaim.
6.5 LEDSYS may require security for payment and suspend the work until that security has been provided.
Article 7 Delivery, delivery time and risk
7.1 Stated delivery times are indicative and are not strict deadlines, unless the parties have expressly designated a deadline as strict in writing.
7.2 Delivery takes place ex warehouse (Ex Works, Incoterms 2020), unless agreed otherwise.
7.3 The risk for the goods passes to the Client at the moment of delivery, even if LEDSYS still has to carry out the installation.
7.4 The Client ensures that the location is accessible at the agreed time and that goods can be unloaded. The costs of a wasted delivery or waiting time are borne by the Client.
7.5 LEDSYS may deliver in instalments and invoice them separately.
Article 8 Installation and handover
8.1 The Client ensures that the work site is ready in time: free and safe access, a suitable surface or supporting structure, and the required electrical and network connections at the agreed location.
8.2 The structural suitability of the building or supporting structure is the responsibility of the Client, unless LEDSYS designed or calculated that structure itself.
8.3 If the work site is not ready, waiting hours, extra journeys and storage are charged at the applicable rates.
8.4 Handover takes place as soon as LEDSYS shows the display in working order and the parties sign a handover document. If the Client starts using the display earlier, that moment counts as the handover.
8.5 Minor defects that do not prevent use do not stop the handover. LEDSYS will repair them within a reasonable period.
Article 9 Changes and additional work
9.1 Changes to the specification are recorded in writing, including the consequences for price and planning.
9.2 Work outside the agreed specification counts as additional work and is charged at the applicable rates.
9.3 LEDSYS informs the Client in advance of the consequences of a change, unless the Client could already foresee those consequences.
9.4 A change may mean that a previously agreed deadline can no longer be met. This does not give grounds for termination or compensation.
Article 10 Warranty
10.1 LEDSYS provides [warranty period to be provided] warranty on panels and control equipment, starting from the handover.
10.2 Under the warranty, LEDSYS repairs or replaces defective parts. LED displays are modular: a defective panel is replaced without removing the entire display.
10.3 The warranty does not cover: normal wear and tear and the gradual decrease in brightness that stays within the specified values, damage caused by incorrect or improper use, interventions by third parties without the consent of LEDSYS, overvoltage and undervoltage, lightning strikes, water or storm damage beyond the stated IP rating, and vandalism.
10.4 A limited number of failed pixels falls within the manufacturer’s standard and does not count as a defect. The applicable standard is stated in the specification.
10.5 The warranty only applies if the Client uses the display in accordance with the supplied documentation and has the prescribed maintenance carried out.
10.6 Repair or replacement does not extend the warranty period.
Article 11 Service and maintenance
11.1 Service and maintenance are laid down in a separate agreement, stating at least the response time, the coverage and the term.
11.2 Without a maintenance agreement, LEDSYS carries out work on a time and materials basis at the applicable rates, subject to available capacity.
11.3 Periodic maintenance is needed to keep the brightness consistent across panels. If the Client does not have this maintenance carried out, the warranty on image quality may be limited.
11.4 LEDSYS keeps spare parts available for as long as the manufacturer supplies them. If a part is no longer available, LEDSYS will propose an equivalent alternative.
Article 12 Retention of title
12.1 All goods supplied remain the property of LEDSYS until the Client has paid everything owed under the agreement, including interest and costs.
12.2 As long as ownership has not passed, the Client may not sell, pledge or otherwise encumber the goods.
12.3 If payment is not made, LEDSYS may repossess the goods. The Client grants access to the location for this purpose.
12.4 The Client insures the goods against fire, theft and damage for as long as the retention of title applies.
Article 13 Intellectual property
13.1 Designs, drawings, calculations, configurations, software and documentation that LEDSYS creates or provides remain the property of LEDSYS, even if the Client has paid for the design.
13.2 The Client may only use these materials for the purpose for which they were provided, and may not reproduce them or provide them to third parties without permission.
13.3 The Client is responsible for the content shown on the display and indemnifies LEDSYS against third-party claims relating to it, including claims concerning copyright, trademark rights and portrait rights.
13.4 LEDSYS may use images of a completed project for its own promotion, unless the Client objects to this in writing.
Article 14 Liability
14.1 The liability of LEDSYS is limited to the amount paid out by its liability insurer in the case concerned, plus the deductible.
14.2 If the insurer does not pay out, liability is limited to the invoice value of the part of the delivery to which the liability relates.
14.3 LEDSYS is not liable for consequential damage, including lost profits, lost advertising or rental income, business interruption, lost savings and damage caused by downtime of the display.
14.4 LEDSYS is not liable for the content shown on the display, nor for damage resulting from data or materials supplied by the Client.
14.5 The limitations in this article do not apply if the damage is the result of intent or deliberate recklessness on the part of LEDSYS or its management.
14.6 Any claim lapses twelve months after the Client discovered or should have discovered the damage.
Article 15 Force majeure
15.1 Force majeure includes in any case: failure of deliveries by suppliers, shortages of raw materials or components, transport disruptions, power and network outages, fire, extreme weather conditions, government measures, cyber incidents and strikes.
15.2 In the event of force majeure, LEDSYS may suspend the work without being liable for compensation.
15.3 If the force majeure lasts longer than sixty days, either party may terminate the agreement in writing for the part that has not yet been performed.
15.4 If LEDSYS has already partly performed when the force majeure occurs, it may invoice that part.
Article 16 Complaints
16.1 The Client inspects the goods on delivery and reports visible defects to LEDSYS in writing within eight days.
16.2 The Client reports defects that were not visible on delivery within fourteen days of discovery.
16.3 A complaint does not suspend the obligation to pay.
16.4 The Client gives LEDSYS the opportunity to investigate and repair a defect. Repair by a third party without prior permission is at the Client’s expense and voids the warranty.
Article 17 Cancellation and suspension
17.1 The Client can only cancel in writing and requires the consent of LEDSYS to do so.
17.2 In the event of cancellation, the Client reimburses the costs already incurred, including design and engineering hours and materials ordered or reserved.
17.3 Custom work, such as media facades, transparent facade screens and other specials, cannot be cancelled free of charge once production has started.
17.4 LEDSYS may suspend or terminate the agreement if the Client fails to meet its obligations, applies for a suspension of payments or is declared bankrupt. Outstanding claims then become immediately due and payable.
Article 18 Applicable law and disputes
18.1 All agreements with LEDSYS are governed by Dutch law. The United Nations Convention on Contracts for the International Sale of Goods (CISG) is excluded.
18.2 Disputes are submitted to the District Court of Overijssel, Almelo location, unless mandatory law designates a different court.
18.3 The parties only submit a dispute to the court after they have tried to resolve it through consultation.

